ODROIDN2-UBOOT-CONFIG

setenv bootlabel "Android Pie (64Bit)"

############################################################
#
# Display & Touch
#
############################################################

# Resolution Configuration
# 'hdmimode' & 'outputmode' must be one of below to configure display resolution within
# supported by your TV or monitor.
# And both of values MUST be same.
#    Symbol             | Resolution
# ----------------------+-------------
#    "480x320p60hz"     | 480x320 Progressive 60Hz
#    "480p60hz"         | 720x480 Progressive 60Hz
#    "576p50hz"         | 720x576 Progressive 50Hz
#    "720p60hz"         | 1280x720 Progressive 60Hz
#    "720p50hz"         | 1280x720 Progressive 50Hz
#    "1080p60hz"        | 1920x1080 Progressive 60Hz
#    "1080p50hz"        | 1920x1080 Progressive 50Hz
#    "1080p30hz"        | 1920x1080 Progressive 30Hz
#    "1080p24hz"        | 1920x1080 Progressive 24Hz
#    "1080i60hz"        | 1920x1080 Interlaced 60Hz
#    "1080i50hz"        | 1920x1080 Interlaced 50Hz
#    "2160p60hz"        | 3840x2160 Progressive 60Hz
#    "2160p50hz"        | 3840x2160 Progressive 50Hz
#    "2160p30hz"        | 3840x2160 Progressive 30Hz
#    "2160p25hz"        | 3840x2160 Progressive 25Hz
#    "2160p24hz"        | 3840x2160 Progressive 24Hz
#    "smpte24hz"        | 3840x2160 Progressive 24Hz SMPTE
#    "640x480p60hz"     | 640x480 Progressive 60Hz
#    "800x480p60hz"     | 800x480 Progressive 60Hz
#    "800x600p60hz"     | 800x600 Progressive 60Hz
#    "1024x600p60hz"    | 1024x600 Progressive 60Hz
#    "1024x768p60hz"    | 1024x768 Progressive 60Hz
#    "1280x800p60hz"    | 1280x800 Progressive 60Hz
#    "1280x1024p60hz"   | 1280x1024 Progressive 60Hz
#    "1360x768p60hz"    | 1360x768 Progressive 60Hz
#    "1440x900p60hz"    | 1440x900 Progressive 60Hz
#    "1600x900p60hz"    | 1600x900 Progressive 60Hz
#    "1600x1200p60hz"   | 1600x1200 Progressive 60Hz
#    "1680x1050p60hz"   | 1680x1050 Progressive 60Hz
#    "1920x1200p60hz"   | 1920x1200 Progressive 60Hz
#    "2560x1080p60hz"   | 2560x1080 Progressive 60Hz
setenv hdmimode "1080p60hz"

### voutmode : hdmi or dvi
setenv voutmode "hdmi"
# setenv voutmode "dvi"

### CVBS encoder : 480CVBS or 576CVBS
#   "480cvbs"   | NTSC, 480i
#   "576cvbs"   | PAL, 576i
#setenv cvbsmode "576cvbs"

# Display Auto Detection
# "false" or "true"
setenv display_autodetect "true"

### Custom modeline
# setenv hdmimode "custombuilt"
### 2560x1440p60hz sample
# setenv modeline "2560,1440,241500,88800,60,2560,2608,2640,2720,1440,1442,1447,1481,1,1,1"

# disable vu7
setenv disable_vu7 "false"

# invert touch screen x,y
setenv touch_invert_x "false"
setenv touch_invert_y "false"

# Display Zoom Rate
setenv zoom_rate "100"

setenv osd_reverse "0"
setenv video_reverse "0"

setenv colorattribute "444,8bit"

setenv suspend_hdmiphy "1"
setenv heartbeat "1"
setenv sg_tablesize "2"
############################################################
#
# CPU
#
############################################################

### A73 max cpu frequency sets
# setenv max_freq_a73 "1992" # 1.992GHz
# setenv max_freq_a73 "1932" # 1.932GHz
# setenv max_freq_a73 "1920" # 1.920GHz
# setenv max_freq_a73 "1908" # 1.908GHz
# setenv max_freq_a73 "1800" # 1.800GHz
# setenv max_freq_a73 "1704" # 1.704GHz
setenv max_freq_a73 "1800"
setenv governor_a73 "performance"

### A53 max cpu frequency sets
# setenv max_freq_a53 "1992" # 1.992GHz
# setenv max_freq_a53 "1896" # 1.896GHz
# setenv max_freq_a53 "1704" # 1.704GHz
setenv max_freq_a53 "1896"
setenv governor_a53 "performance"

setenv test_mt_vid "0000"
setenv test_mt_pid "0000"

# Enable backlight_pwm
# disable : backlight "no"
# ODROID-VU5/7 : backlight "yes"
# ODROID-VU8 : backlight "invert"
setenv backlight_pwm "yes"


# gpio power key :  GPIOX.3 (Pin 11) of 2x20 pins connector
#setenv gpiopower "479"

############################################################
#
# Boot args
#
############################################################

# Wake on Lan
setenv enable_wol "0"

# HPD enable/disable option
setenv disablehpd "false"

# Init args
setenv rootopt "rootfstype=ramfs init=/init"
setenv consoleopt "console=ttyS0,115200n8 no_console_suspend earlyprintk=aml-uart,0xff803000 quiet"
setenv ramoopsopt "ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000"
setenv touchopt "touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y}"
setenv displayopt "colorattribute=${colorattribute} disablehpd=${disablehpd}"
setenv testmtopt "test_mt_vid=${test_mt_vid} test_mt_pid=${test_mt_pid} backlight_pwm=${backlight_pwm}"
setenv androidopt "androidboot.selinux=permissive androidboot.firstboot=${firstboot} jtag=disable androidboot.hardware=odroidn2 otg_device=1 buildvariant=eng"
setenv miscopt "disable_vu7=${disable_vu7} ${touchopt} zoom_rate=${zoom_rate} ${testmtopt} suspend_hdmiphy=${suspend_hdmiphy} usb-xhci.tablesize=${sg_tablesize}"

# dtbs & boot addr
setenv dtb_mem_addr 0x1000000
setenv loadaddr 0x1080000

# logo
setenv display_layer "osd0"
setenv fb_addr "0x3d800000"
setenv logo "${display_layer},loaded,${fb_addr}"

# Boot Arguments
if test "${display_autodetect}" = "true"; then hdmitx edid; fi
# TODO -> if test "${display_autodetect}" = "true"; then usb pwren; hdmitx edid; fi
if test "${hdmimode}" = "custombuilt"; then setenv cmode "modeline=${modeline} customwidth=${customwidth} customheight=${customheight}"; fi

setenv initargs "${rootopt} ${consoleopt} ${ramoopsopt} max_freq_a73=${max_freq_a73} max_freq_a53=${max_freq_a53} ${cmode} ${miscopt}"

setenv bootargs "${initargs} ${androidopt} ${displayopt} logo=${logo} cvbsmode=${cvbsmode} hdmimode=${hdmimode} voutmode=${voutmode} cvbscable=${cvbscable} osd_reverse=${osd_reverse} video_reverse=${video_reverse} gpiopower=${gpiopower} enable_wol=${enable_wol}"

movi read boot 0 ${loadaddr}
movi read dtbs 0 ${dtb_mem_addr}
fdt addr ${dtb_mem_addr}
if test "${heartbeat}" = "0"; then fdt set /leds/blueled linux,default-trigger "none"; fi
booti ${loadaddr} - ${dtb_mem_addr}
bootm