Mini IO Board for M1S
- Compatible with ODROID-M1S
- This is a convenient input/output port board that can be used by plugging directly into the 14-pin header connector of ODROID-M1S.
- USB 2.0 host, Power button, Reset button, Audio line-out 3.5mm phone jack and I2C & UART buses are available on a small board.
- System power noise may affect the audio circuitry, resulting in background noise in the audio output.
Therefore, we recommend that our customers do not use the phone jack output in applications requiring high sound quality.
- You have to remove the upper case to mount this IO board on the ODROID-M1S.
- The USB host power path uses a protector IC AP22802 from Diodes Incorporated.
- Over Current with Auto Recovery
- Short Circuit with Auto Recovery
- Over Temperature with Auto Recovery
Schematics
- A green soft feeling tactile switch for system reset
- A red soft feeling tactile switch for system power
- USB 2.0 host type-A connector with a protection circuit
- 14pin header socket SMD type
- 6P header pin for I2C and UART (Not populated)
- 3.5mm stereo audio output
How to connect
When you connect the Mini IO board to M1S, you need to remove the top-side case.
luke.go