Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
accessory:display:3.2inch_tft_touchscreen_shield:c1:start [2017/07/28 15:08]
luke.go ↷ Links adapted because of a move operation
accessory:display:3.2inch_tft_touchscreen_shield:c1:start [2017/09/21 10:17]
luke.go [Run Xwindow]
Line 1: Line 1:
-====== Use to C-3.2inch TFT+Touchscreen Shield ====== 
- 
-{{https://​dn.odroid.com/​homebackup/​C13_2inchTouchscreenDisplayShieldHome.jpg?​500|}} 
- 
-Fully assembled 3.2inch display with 320x240 pixels TFT LCD and a resistive touch overlay. 2x13 tall female header is already soldered on the PCB.  
- 
-Fast 30Mhz SPI is used for the faster frame rate. 
- 
-You will need an official Ubuntu image to configure it.  
-**You can simply download the Kernel updates and configure your Board for this display shield.** 
- 
-[[http://​www.hardkernel.com/​main/​products/​prdt_info.php?​g_code=G142060963922|Where to buy]] 
- 
-<fs 300%>​[[..:​spec_pin_info|Specification and pin information]]</​fs>​ 
 ====== How to activate the 3.2inch LCD shield with your ODROID-C1+ ====== ====== How to activate the 3.2inch LCD shield with your ODROID-C1+ ======
-<​WRAP ​center ​round important>​+<WRAP round important>​
   * You need a **HDMI connection or a Serial console connection** to follow below instruction.\\ ​   * You need a **HDMI connection or a Serial console connection** to follow below instruction.\\ ​
-  * Operation confirmed with testing in our [[odroid-c1:​release_note:​ubuntu:​v2.1|Ubuntu 16.04 LTS (v2.1)]]+  * Operation confirmed with testing in our [[odroid-c1:​os_images:​ubuntu:​v2.1|Ubuntu 16.04 LTS (v2.1)]]
 </​WRAP>​ </​WRAP>​
 ===== Configuring framebuffer and Touch driver ===== ===== Configuring framebuffer and Touch driver =====
-==== 0. Update your Kernel ​====+=== 0. Update your Kernel ===
 <code bash target> <code bash target>
 sudo apt update && apt upgrade && apt dist-upgrade sudo apt update && apt upgrade && apt dist-upgrade
 </​code>​ </​code>​
  
-==== 1. Insert modules ​====+=== 1. Insert modules ===
 <code bash target> <code bash target>
 sudo modprobe spicc sudo modprobe spicc
Line 69: Line 55:
     Identifier ​   "​fbdev"​     Identifier ​   "​fbdev"​
     Driver ​       "​fbdev"​     Driver ​       "​fbdev"​
-    Option ​       "​fbdev"​ "/dev/fbX"+    Option ​       "​fbdev"​ "/dev/fb2"
 EndSection EndSection
 </​code>​ </​code>​
Line 79: Line 65:
 </​code>​ </​code>​
 ===== Touch Calibration ===== ===== Touch Calibration =====
-  * [[accessory:​display:​c1_3.2inch_tft_touchscreen_shield:​c1:​tft_touch| How to enable & calibrate your touchscreen]]+  * [[accessory:​display:​3.2inch_tft_touchscreen_shield:​c1:​touch| How to enable & calibrate your touchscreen]]
 ===== Auto Run ===== ===== Auto Run =====
-  * [[accessory:​display:​c1_3.2inch_tft_touchscreen_shield:​c1:​tft_autoconsole| Automatically start console mode]] +  * [[accessory:​display:​3.2inch_tft_touchscreen_shield:​c1:​autoconsole| Automatically start console mode]] 
-  * [[accessory:​display:​c1_3.2inch_tft_touchscreen_shield:​c1:​tft_autox| Automatically start desktop GUI mode]]+  * [[accessory:​display:​3.2inch_tft_touchscreen_shield:​c1:​autox| Automatically start desktop GUI mode]]
 ===== Applications ===== ===== Applications =====
-  * [[accessory:​display:​c1_3.2inch_tft_touchscreen_shield:​c1:​tft_mplayer| Using the mplayer on framebuffer]] +  * [[accessory:​display:​3.2inch_tft_touchscreen_shield:​c1:​mplayer| Using the mplayer on framebuffer]] 
-  * [[accessory:​display:​c1_3.2inch_tft_touchscreen_shield:​c1:​tft_keypads| Using the Keypads on the TFT LCD]]+  * [[accessory:​display:​3.2inch_tft_touchscreen_shield:​c1:​keypads| Using the Keypads on the TFT LCD]]