Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
accessory:display:3.2inch_tft_touchscreen_shield:c1:start [2017/07/28 15:08]
luke.go ↷ Page name changed from accessory:display:c1_3.2inch_tft_touchscreen_shield:c1:c1 to accessory:display:c1_3.2inch_tft_touchscreen_shield:c1:start
accessory:display:3.2inch_tft_touchscreen_shield:c1:start [2017/08/02 15:40]
codewalker ↷ Links adapted because of a move operation
Line 1: Line 1:
-====== Use to C-3.2inch TFT+Touchscreen Shield ====== 
- 
-{{https://​dn.odroid.com/​homebackup/​C13_2inchTouchscreenDisplayShieldHome.jpg?​500|}} 
- 
-Fully assembled 3.2inch display with 320x240 pixels TFT LCD and a resistive touch overlay. 2x13 tall female header is already soldered on the PCB.  
- 
-Fast 30Mhz SPI is used for the faster frame rate. 
- 
-You will need an official Ubuntu image to configure it.  
-**You can simply download the Kernel updates and configure your Board for this display shield.** 
- 
-[[http://​www.hardkernel.com/​main/​products/​prdt_info.php?​g_code=G142060963922|Where to buy]] 
- 
-<fs 300%>​[[..:​spec_pin_info|Specification and pin information]]</​fs>​ 
 ====== How to activate the 3.2inch LCD shield with your ODROID-C1+ ====== ====== How to activate the 3.2inch LCD shield with your ODROID-C1+ ======
-<​WRAP ​center ​round important>​+<WRAP round important>​
   * You need a **HDMI connection or a Serial console connection** to follow below instruction.\\ ​   * You need a **HDMI connection or a Serial console connection** to follow below instruction.\\ ​
-  * Operation confirmed with testing in our [[odroid-c1:​release_note:​ubuntu:​v2.1|Ubuntu 16.04 LTS (v2.1)]]+  * Operation confirmed with testing in our [[odroid-c1:​os_images:​ubuntu:​v2.1|Ubuntu 16.04 LTS (v2.1)]]
 </​WRAP>​ </​WRAP>​
 ===== Configuring framebuffer and Touch driver ===== ===== Configuring framebuffer and Touch driver =====
-==== 0. Update your Kernel ​====+=== 0. Update your Kernel ===
 <code bash target> <code bash target>
 sudo apt update && apt upgrade && apt dist-upgrade sudo apt update && apt upgrade && apt dist-upgrade
 </​code>​ </​code>​
  
-==== 1. Insert modules ​====+=== 1. Insert modules ===
 <code bash target> <code bash target>
 sudo modprobe spicc sudo modprobe spicc
Line 79: Line 65:
 </​code>​ </​code>​
 ===== Touch Calibration ===== ===== Touch Calibration =====
-  * [[accessory:​display:​c1_3.2inch_tft_touchscreen_shield:​c1:​tft_touch| How to enable & calibrate your touchscreen]]+  * [[accessory:​display:​3.2inch_tft_touchscreen_shield:​c1:​touch| How to enable & calibrate your touchscreen]]
 ===== Auto Run ===== ===== Auto Run =====
-  * [[accessory:​display:​c1_3.2inch_tft_touchscreen_shield:​c1:​tft_autoconsole| Automatically start console mode]] +  * [[accessory:​display:​3.2inch_tft_touchscreen_shield:​c1:​autoconsole| Automatically start console mode]] 
-  * [[accessory:​display:​c1_3.2inch_tft_touchscreen_shield:​c1:​tft_autox| Automatically start desktop GUI mode]]+  * [[accessory:​display:​3.2inch_tft_touchscreen_shield:​c1:​autox| Automatically start desktop GUI mode]]
 ===== Applications ===== ===== Applications =====
-  * [[accessory:​display:​c1_3.2inch_tft_touchscreen_shield:​c1:​tft_mplayer| Using the mplayer on framebuffer]] +  * [[accessory:​display:​3.2inch_tft_touchscreen_shield:​c1:​mplayer| Using the mplayer on framebuffer]] 
-  * [[accessory:​display:​c1_3.2inch_tft_touchscreen_shield:​c1:​tft_keypads| Using the Keypads on the TFT LCD]]+  * [[accessory:​display:​3.2inch_tft_touchscreen_shield:​c1:​keypads| Using the Keypads on the TFT LCD]]