'ODROID-N2' on this page refers to the ODROID-N2 series (N2, N2+, N2L).

Android Things with Color Sensor (TCS34725)

target board Device Tree Overlay config file path
ODROID-N2/C4 /odm/env.ini
ODROID-M1 /fat/config.ini

the “overlays” options must contain this values.

Pin Number Name Usage
1 3.3V RGB Sensor Power
3 I2C SDA RGB Sensor I2C SDA
5 I2C SCL RGB Sensor I2C SCL
9 GND RGB Sensor Ground
22 GPIO RGB Sensor LED Switch

Create the Project

  1. Start Android Studio & Select “Get from VCS”.
  2. Insert the repository url “” and clone it.

Building && Uploading

  1. Select the Tcs34725 from Run Configurations menu.

  2. Connect otg cable to the ODROID Board.
  3. Select a target board and run.
  • common/android_things/color_sensor.txt
  • Last modified: 2023/08/16 16:14
  • by luke.go