Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
common:application_note:software:spi_ss_irq [2020/04/23 15:36]
luke.go ↷ Page moved from internal:common:application_note:software:spi_ss_irq to common:application_note:software:spi_ss_irq
common:application_note:software:spi_ss_irq [2020/04/23 15:55] (current)
luke.go ↷ Links adapted because of a move operation
Line 27: Line 27:
 <tabbox ODROID-C4>​ <tabbox ODROID-C4>​
 <WRAP group> <WRAP group>
-You can find the number of gpio-<​nr>​ [[internal:odroid-c4:​hardware:​expansion_connectors#​j2_-_2x20_pins|this Expansion Connector]] in a column named "GPIO & Export No".+You can find the number of gpio-<​nr>​ [[odroid-c4:​hardware:​expansion_connectors#​j2_-_2x20_pins|this Expansion Connector]] in a column named "GPIO & Export No".
  
 And then, modify the num_chipselect and cs_gpios properties.\\ And then, modify the num_chipselect and cs_gpios properties.\\
Line 80: Line 80:
  
 If you want to test GPIO IRQs with CLI, please refer to this link.\\ If you want to test GPIO IRQs with CLI, please refer to this link.\\
-[[internal:odroid-c4:​application_note:​gpio:​irq|IRQ test on terminal]]+[[odroid-c4:​application_note:​gpio:​irq|IRQ test on terminal]]
  
 You can check whether IRQ is in use or not with "cat /​proc/​interrupts"​.\\ You can check whether IRQ is in use or not with "cat /​proc/​interrupts"​.\\