3.2inch TFT+Touchscreen Shield
Fully assembled 3.2inch display with 320×240 pixels TFT LCD and a resistive touch overlay. 2×13 tall female header is already soldered on the PCB.
Fast 30Mhz SPI is used for the faster frame rate.
You will need an official Ubuntu image to configure it. You can simply download the Kernel updates and configure your Board for this display shield.
ODROID-C1+
ODROID-XU4
- If you want to use it with ODROID XU4, you'll need this: XU4 Shifter Shield
ODROID-N2
Specification and Pin Information
| LCD Type | TFT |
| LCD Interface | SPI |
| Touch Screen Type | Resistive |
| Touch Screen Controller | XPT2046 |
| Colors | 65536 |
| Backlight | LED |
| Resolution | 320*240(Pixel) |
| Aspect Ratio | 4:3 |
| Weight | 44gram |
- For more information that comes with the board, please visit: Specification and pin information
Board Specific Manual
- The guide is based on the Ubuntu Mate, not on the Ubuntu Minimal.
- If you want to use 3.2 inch TFT touchscreen shield, we recommend using the Ubuntu Mate.
Visit the page you want to learn for your ODROID.
joshua