Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
odroid-c2:application_note:gpio:uart [2017/06/30 09:32]
luke.go [How to enable UART_B and UART_C ports]
odroid-c2:application_note:gpio:uart [2017/07/24 17:40] (current)
luke.go ↷ Links adapted because of a move operation
Line 9: Line 9:
 ==== How to test external UART pin on the 40-pin header ==== ==== How to test external UART pin on the 40-pin header ====
  
-You need to prepare below items.+You need to prepare below items:
   * **ODROID-C2**   * **ODROID-C2**
   * USB-UART Module Kit   * USB-UART Module Kit
Line 17: Line 17:
 You will connect jumper wire as below picture.\\ You will connect jumper wire as below picture.\\
 Connect the USB-PORT of USB-UART Module to your HOST PC\\ Connect the USB-PORT of USB-UART Module to your HOST PC\\
-**The RXD and TXD must be twisted ​each other.**\\+**The RXD and TXD must be twisted ​together.**\\
  
 {{:​en:​c1:​odroidc1_uart.jpg?​300|}} {{:​en:​c1:​odroidc1_uart.jpg?​300|}}
Line 88: Line 88:
 ==== How to enable UART_B and UART_C ports ==== ==== How to enable UART_B and UART_C ports ====
 Up to 4 ports can be used for UART in ODROID-C2---UART_A0(Serial console), UART_A, UART_B and UART_C.\\ Up to 4 ports can be used for UART in ODROID-C2---UART_A0(Serial console), UART_A, UART_B and UART_C.\\
-There are UART_A, UART_B and UART_C in [[..:​hardware:​c2_hardware_gpio_i2s_connector|expansion connectors of ODROID-C2]].+There are UART_A, UART_B and UART_C in [[..:..:​hardware:​expansion_connectors|expansion connectors of ODROID-C2]].