Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
odroid-c2:troubleshooting:changing_hdmi_resolution [2017/06/29 18:01]
luke.go [How to change U-boot configuration by BOOT.INI]
odroid-c2:troubleshooting:changing_hdmi_resolution [2017/07/25 10:47] (current)
luke.go ↷ Page name changed from odroid-c2:troubleshooting:tips to odroid-c2:troubleshooting:changing_hdmi_resolution
Line 1: Line 1:
-====== Tips for ODROID-C2 ====== 
-This page introduce you an useful tips to use **ODROID-C2**. 
----- 
 ====== How to change HDMI output resolution ====== ====== How to change HDMI output resolution ======
 **ODROID-C2** can support various resolution on HDMI output, you can select one of supported resolutions for your display (LCD monitor or TV). **ODROID-C2** can support various resolution on HDMI output, you can select one of supported resolutions for your display (LCD monitor or TV).
Line 14: Line 11:
  
 ===== Linux / Ubuntu ===== ===== Linux / Ubuntu =====
-Coming soon...+[[odroid-c2:​application_note:​software:​auto_detect_display|Display Auto Detection using EDID]]
 ===== Lowlevel Change ===== ===== Lowlevel Change =====
 This section introduce you to change the resolution by manual, this would be helpful if you are failure to change the resolution and not able to sett the face of **ODROID-C2**. This section introduce you to change the resolution by manual, this would be helpful if you are failure to change the resolution and not able to sett the face of **ODROID-C2**.
Line 63: Line 60:
  
 </​code>​ </​code>​
-====== How to change U-boot configuration by BOOT.INI ====== 
----- 
-In order to support easy boot loader setup, ODROID-C2 also support **boot.ini** as previous ODROID boards. So you can easily list up the commands what you want to executed in U-boot rather than the default. Here is the example to boot Ubuntu. 
- 
-You can download the file below and copy into your FAT partition. 
- 
-=== Android boot.ini example === 
-[[https://​github.com/​codewalkerster/​android_device_hardkernel_odroidc2/​blob/​s905_6.0.1_master/​files/​boot.ini.template|boot.ini]] 
- 
-=== Linux boot.ini example === 
-[[https://​github.com/​mdrjr/​c2_bootini/​blob/​master/​boot.ini|boot.ini]] 
-===== Board Identifier ===== 
-This is the keyword to identify the correct **BOOT.INI** as per board. For **ODROID-C2**,​ any **BOOT.INI** must contain **ODROIDC2-UBOOT-CONFIG** and other commands must be below this. 
-===== U-boot commands ===== 
-You can describe multiple commands of U-boot from the next line of **ODROIDC2-UBOOT-CONFIG**. The commands are only restricted within the commands enabled by the running U-boot. 
- 
-====== How to replace booting logo ====== 
-**ODROID-C2** can show booting logo on the display till target O/S is started. 
- 
-Please refer to the following [[odroid-c2/​application_note/​software/​c2_bootlogo|wiki page]]. 
- 
- 
-