Auto Start Of System When Power Applied
You can set how H3 does when power applied.
Thanks to this configuration, you can make it keeps in online even if it turns off unexpectedly when you're not at home.
This option is located at
Chipset → PCH-IO Configuration → State After G3
G3 (G3 State) means the Mechanical Off, which is one of the ACPI power states.
There're three options you can select.
- S0 State: System will boot directly as soon as power applied.
- S5 State: System keeps in power-off state until the power button is pressed.
So if you select S0 State, it makes your H3 will auto-start whenever AC power is on.
If you want to know further information about the power states, please refer to the references.
luke.go