How to assembly fan on H3 case

Installing the fan in the blow air in can actually cool the heat better than blow air out on the case.

We recommend installing the FAN as Blowing Air-In method.
Because it makes ~30% higher cooling efficiency than Blowing Air-Out relatively.

The guide below is based on type 2.

  1. Organizing the cables of the fan
  2. Tighten 4 screws on the top case panel with the fan
  3. Connect 4-pin Fan connector to the H3/H3+ board
  • Blow Air Inward
  • Blow Air Outward (Not Recommended due to lower cooling efficiency)
  • odroid-h3/application_note/howto_install_fan_on_case.txt
  • Last modified: 2023/02/01 17:53
  • by justin