odroid-m1:application_note:powerbutton

ODROID-M1 have on-board power button pins on the J7 header pins that user can connect to a momentary switch and it reports a key event to an operating system. Since ODROID-M1 starts as soon as DC power is supplied, this button only works after cold booting.

A momentary switch can be used to wire with the on-board power pinout (2.54mm pin header) that fits with a dupont connector (2P female), optionally one can use a switch with LED (3.3V).

FUNCTION PIN number
SW-1
SW-2
LED (+) #1 (3.3V)
LED (-) #6 (GND)

  • odroid-m1/application_note/powerbutton.txt
  • Last modified: 2022/11/16 16:09
  • by justin