Insert the prepared SD card into your ODROID-GO and turn on the power.

  • - A card could not be detected. Ensure the card is properly inserted.
  • - Files are not properly written to the SD card, or its contents are corrupted.

When you receive the product for the first time, the go-play App is basically written. So you can play games right away after you put the ROM on your SD card.

  • Left/Right - select game system to emulate.
  • A - show available ROM for the emulator selected.
  • B - returns to a previously active ROM.

ROM Selection

  • Up/Down - select a file.
  • Right/Left - change the page of displayed files.
  • A - select a file.
  • B - return to Main Menu.
  • After selecting a file, a progress bar will be displayed. The blue gauge shows erase progress while the green gauge shows flash progress. Emulation begins after the green gauge is full.

General Emulator Controls
Function Keys
Save game and return to Main Menu Menu
Reset a game Power Switch Off → Hold StartPower Switch On → Release Start when game appear
Force exit emulator or recover from a non-responsive emulator Power Switch Off → Hold MenuPower switch On → Release Menu when Main Menu appears
System Controls
Function Keys
Adjust speaker volume level Press Volume to change volume level; Mute, Low, Mid, High
Adjust display brightness Hold Start, and press Up/Down
Toggling screen scaling Hold Start, and press Right to toggle between scaling mode and pixel perfect mode
Sleep Hold Menu for 2 seconds. Press Menu again to wake up
NES, Gameboy, and Gameboy Color
  • Up, Down, Left, Right, A, B, Select, Start
Sega Master System
  • Up, Down, Left, Right
  • A - Button 1
  • B - Button 2
  • Select - Pause
Game Gear
  • Up, Down, Left, Right
  • A - Button 1
  • B - Button 2
  • Start
Check device status with the blue LED while in emulator
  • Solid - When the game is being saved.
  • Blinking - When the battery is critically low.
  • odroid_go/emulator/go_play.txt
  • Last modified: 2020/12/25 00:24
  • by ducalex