Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
odroid_go:go_assembling [2018/07/01 21:01]
john1117 [Build instruction]
odroid_go:go_assembling [2019/04/02 08:32] (current)
odroid [Warning & Caution]
Line 2: Line 2:
 This page shows how to assemble the ODROID-GO kit. This page shows how to assemble the ODROID-GO kit.
  
-===== The enclosed parts in the ODROID-GO package ====+===== The enclosed parts in the ODROID-GO package ​=====
  
-{{:accessory:odroid_go:package_odroid_go.jpg?600|}}+{{:​odroid_go:​odroidgoparts1.jpg?600|}}
  
 A. 1x ODROID-GO Board\\ A. 1x ODROID-GO Board\\
Line 20: Line 20:
 M. 1x %%Micro USB%% Cable\\ M. 1x %%Micro USB%% Cable\\
 N. 1x 1200mAh Li-ion battery\\ N. 1x 1200mAh Li-ion battery\\
-==== Build instruction ====+===== Build instruction ​=====
 This section shows you how you can build the ODROID-GO. Please carefully follow the instruction below. This section shows you how you can build the ODROID-GO. Please carefully follow the instruction below.
  
-=== LCD window ===+==== LCD window ​====
 First, in order to protect LCD screen, you have to place the enclosed plastic screen cover on the front enclosure. Please completely remove the sticker on the back of the screen cover and carefully place it on the front enclosure. First, in order to protect LCD screen, you have to place the enclosed plastic screen cover on the front enclosure. Please completely remove the sticker on the back of the screen cover and carefully place it on the front enclosure.
  
Line 31: Line 31:
 {{:​accessory:​odroid_go:​asm_6.jpg?​300|}} {{:​accessory:​odroid_go:​asm_6.jpg?​300|}}
  
-=== LCD screen ===+==== LCD screen ​====
 Second, you need to attach the 2.4" LCD screen to the front enclosure. Please note that you must remove the vinyl cover on the LCD screen before placing LCD module in the front enclosure. Also, you would need to slightly wipe or blow out the window cover or LCD screen in order to remove any dust or fingerprints. Second, you need to attach the 2.4" LCD screen to the front enclosure. Please note that you must remove the vinyl cover on the LCD screen before placing LCD module in the front enclosure. Also, you would need to slightly wipe or blow out the window cover or LCD screen in order to remove any dust or fingerprints.
 +
 +<WRAP important>​
 +<color #​ed1c24>​Please be careful when you insert your LCD into the front enclosure, otherwise the LCD module may break.</​color>​\\ ​
 +<color #​ed1c24>​Refer to this video before assembling: [[https://​youtu.be/​6wwHmgX5U3w| Youtube - ODROID-GO LCD Assembly]]</​color>​\\ ​
 +</​WRAP>​
  
 {{:​accessory:​odroid_go:​asm_8.jpg?​300|}} {{:​accessory:​odroid_go:​asm_8.jpg?​300|}}
Line 38: Line 43:
 {{:​accessory:​odroid_go:​asm_10.jpg?​300|}} {{:​accessory:​odroid_go:​asm_10.jpg?​300|}}
  
-=== Play buttons ===+<WRAP important>​ 
 +<color #​ed1c24>​If you press the edges of the LCD panel too hard with your fingers while inserting the LCD, it may damage the glass as shown below pictures. ​ </​color>​ 
 +</​WRAP>​ 
 +{{:​odroid_go:​break_lcd1.jpg?​300|}} 
 +{{:​odroid_go:​break_lcd2.jpg?​300|}} 
 + 
 +==== Play buttons ​====
 Third, place the play buttons in the front enclosure. You need to cut and remove the plastic buttons (an arrow key piece, buttons '​A'​ and '​B'​) from the plastic button set enclosed, and then put the rubber pieces on top of the plastic keys. Third, place the play buttons in the front enclosure. You need to cut and remove the plastic buttons (an arrow key piece, buttons '​A'​ and '​B'​) from the plastic button set enclosed, and then put the rubber pieces on top of the plastic keys.
  
Line 44: Line 55:
 {{:​accessory:​odroid_go:​asm_12.jpg?​300|}} {{:​accessory:​odroid_go:​asm_12.jpg?​300|}}
  
-=== Main board === +==== Main board ==== 
-Next is the main part of the assembling instructions. Please carefully put the ODROID-GO board in the front enclosure and connect the LCD cable to the board. After the LCD screen cable is firmly connected, you can fasten the main board with the screws (3x) enclosed.+Next is the main part of the assembling instructions. Please carefully put the ODROID-GO board in the front enclosure and connect the LCD cable to the board.\\ 
 +<color #​ed1c24>​You have to fully insert the LCD FPC cable into the connector. Otherwise, the display will not work from time to time.</​color>​\\ 
 +<color #​ed1c24>​The white line of FPC cable has to reach very close to the connector locker.</​color>​\\ 
 +After the LCD screen cable is firmly connected, you can fasten the main board with the screws (4x) enclosed.
  
 <WRAP important>​ <WRAP important>​
-Please very carefully connect the LCD to the ODROID-GO board, otherwise the screen ​will break.+<color #ed1c24>Please very carefully connect the LCD to the ODROID-GO board, otherwise the screen ​may break.</​color>​
 </​WRAP>​ </​WRAP>​
  
 {{:​accessory:​odroid_go:​asm_13.jpg?​300|}} {{:​accessory:​odroid_go:​asm_13.jpg?​300|}}
 {{:​accessory:​odroid_go:​asm_15.jpg?​300|}} {{:​accessory:​odroid_go:​asm_15.jpg?​300|}}
-{{:​accessory:​odroid_go:​asm_16.jpg?300|}}+ 
 +{{:​accessory:​odroid_go:​asm_16_2.png?500|}}
  
 You also need to connect the battery pack and speaker module to the ODROID-GO board. It would be a good idea to wrap the speaker wires as shown in the picture, otherwise, it would be difficult to close the back enclosure. You also need to connect the battery pack and speaker module to the ODROID-GO board. It would be a good idea to wrap the speaker wires as shown in the picture, otherwise, it would be difficult to close the back enclosure.
Line 62: Line 77:
 {{:​accessory:​odroid_go:​asm_20.jpg?​300|}} {{:​accessory:​odroid_go:​asm_20.jpg?​300|}}
  
-=== Power key ===+ 
 +==== Power key ====
 Another piece which you have to cut on the plastic button set is the power key, and you can place the power switch at the side of the ODROID-GO. Another piece which you have to cut on the plastic button set is the power key, and you can place the power switch at the side of the ODROID-GO.
  
 {{:​accessory:​odroid_go:​asm_21.jpg?​300|}} {{:​accessory:​odroid_go:​asm_21.jpg?​300|}}
  
-=== Close the back enclosure ===+==== Close the back enclosure ​====
 Finally, you can close the back enclosure of the ODROID-GO with the screws (6x) enclosed. You can also try to turn on the ODROID-GO before closing the back enclosure. Finally, you can close the back enclosure of the ODROID-GO with the screws (6x) enclosed. You can also try to turn on the ODROID-GO before closing the back enclosure.
  
Line 76: Line 92:
 {{:​accessory:​odroid_go:​asm_23.jpg?​300|}} {{:​accessory:​odroid_go:​asm_23.jpg?​300|}}
  
-=== Memory card ===+==== Memory card ====
 Since the ODROID-GO loads the games from the memory card (Micro SD type), you must insert a memory card in the card slot on the bottom of the ODROID-GO. In order to copy the game images to the memory card, please visit the [[https://​wiki.odroid.com/​odroid_go/​emulator/​make_sd_for_importing_roms|link]]. Since the ODROID-GO loads the games from the memory card (Micro SD type), you must insert a memory card in the card slot on the bottom of the ODROID-GO. In order to copy the game images to the memory card, please visit the [[https://​wiki.odroid.com/​odroid_go/​emulator/​make_sd_for_importing_roms|link]].
  
Line 84: Line 100:
  
 {{:​accessory:​odroid_go:​asm_25.jpg?​300|}} {{:​accessory:​odroid_go:​asm_25.jpg?​300|}}
 +====== Warning & Caution ======
 +<WRAP important>​
 +<color #​ed1c24>​If you press the edges of the LCD panel too hard with your fingers while inserting the LCD, it may damage the TFT glass as shown below pictures. ​ </​color>​
 +</​WRAP>​
 +{{:​odroid_go:​break_lcd1.jpg?​300|}}
 +{{:​odroid_go:​break_lcd2.jpg?​300|}}
 +
 +====== Yet Another ODROID-GO Build Tutorial ======
 +This is a photo driven build tutorial for the ODROID-GO kit with a bunch of little tips along the way. Written by forum user @vbrusca.\\
 +[[http://​middlemind.net/​tutorials/​odroid_go/​odroid_go_build.html|Yet Another ODROID-GO Build Tutorial]]
 +