odroid_go_advance:preparations:available_power_source

Power Source Limitation

The ODROID-GO Advance can charge the battery with a 5 volt PSU (Power Supply Unit) only.

If the PSU output voltage is 9V and 5V dual-type something like this QuickCharge stuff, it will not charge the OGA at all since the negotiation protocol doesn't work.
There will be no light from the LEDs on the board if the voltage is higher than 6Volt.

  • odroid_go_advance/preparations/available_power_source.txt
  • Last modified: 2020/02/24 14:36
  • by odroid