ODROID-GO-ADVANCE
Board Detail
OGA Revision 1.1
| A | PMIC(RK817) including a charger and audio features. | D | X, Y, A, B buttons |
| B | D-pad buttons | E | Trigger Left2 |
| C | I ~ VI buttons (F1, F2, F3, F4, F5, F6) | F | Trigger Right2 |
| A | CPU : Rockchip RK3326 | K | USB-C power Jack |
| B | RAM : 1GB DDR3L | L | 10pin expansion port |
| C | SPI Flash(16Mbytes Boot) | M | Audio jack |
| D | MicroSD card slot | N | 20pin LCD connector |
| E | Forced SD card boot(without spirom) | O | PWR switch |
| F | UART port(But not mounted default) | P | Analog joystick connector |
| G | Speaker connector | Q | Left trigger button |
| H | Battery connector | R | Right trigger button |
| I | USB 2.0 type-A Host | S | Wireless module ESP-WROOM-S2 |
| J | Statue LED(charger, alive, power) | ||
OGA Revision 1.0
| A | PMIC(RK817) including a charger and audio features. | C | I ~ VI buttons (F1, F2, F3, F4, F5, F6) |
| B | D-pad buttons | D | X, Y, A, B buttons |
| A | CPU : Rockchip RK3326 | J | Statue LED(charger, alive, power) |
| B | RAM : 1GB DDR3L | K | DC Power Jack |
| C | SPI Flash(16Mbytes Boot) | L | 10pin expansion port |
| D | MicroSD card slot | M | Audio jack |
| E | Forced SD card boot(without spirom) | N | 20pin LCD connector |
| F | UART port(But not mounted default) | O | PWR switch |
| G | Speaker connector | P | Analog joystick connector |
| H | Battery connector | Q | Left trigger button |
| I | USB 2.0 type-A Host | R | Right trigger button |
Specifications
| Revision 1.0 | Revision 1.1 | |
|---|---|---|
| Processor | CPU : RockChip RK3326(Quad-Core ARM 64bit Cortex-A35 1.3GHz) GPU : Mali-G31 MP2 |
|
| OS | Ubuntu 18.04. 19.10 and 20.04 on Kernel 4.4 Aarch64 Modified EmulationStation front-end with Libretro. GPU accelerated OpenGL-ES on DRM-FB |
|
| Memory | 1GB (DDR3L 786Mhz, 32 Bits bus width) | |
| Storage | SPI Flash(16Mbytes Boot), Micro SD Card slot(UHS-1 Capable interface) | |
| Display | 3.5inch 320×480 TFT LCD (Wide viewing angle display, MIPI-DSI interface) | |
| Audio | Earphone stereo jack, 0.5Watt 8Ω Mono speaker | |
| Battery | Li-Polymer 3.7V/3000mAh(76.5×54.5×5.7mm(L*W*T)), Up to 10 hours of continuous game playing time | Li-Polymer 3.7V/3000mAh(76.5×54.5×5.7mm(L*W*T)), Up to 9 hours of continuous game playing time |
| DC Jack | 5V input, 2.5mm diameter DC plug: A USB charging cable is included in the package. Maximum drawing current: 1.5Amp | 5V input, USB-C power connector : A USB -C charging cable is included in the package. Maximum drawing current: 1.5Amp |
| External I/O | USB 2.0 Host x 1, 10Pin port(I2C, GPIO, IRQ at 3.3Volt) | |
| Input Buttons | F1, F2, F3, F4, F5, F6, A, B, X, Y, Direction Pad, Left Shoulder, Right Shoulder, Analog joystick | F1, F2, F3, F4, F5, F6, A, B, X, Y, Direction Pad, Left Shoulder, Right Shoulder, Left Shoulder2, Right Shoulder2, Analog joystick |
| Wireless | Optional USB WiFi adapter | Built-in 2.4Ghz 802.11b/g/n (ESP-WROOM-S2) |
| Power consumption | Game emulation: 250 ~ 500mA (depends on backlit brightness and type of game emulations), Power off mode: <1mA | Game emulation: 300 ~ 550mA (depends on backlit brightness and type of game emulations and the wireless usage), Power off mode: <1mA If you turn the WiFi off, the power consumption will be same as the previous Revision 1.0. |
| Charging time | 2.5~3 hours when the device turns off. When you play game, it takes 4~5 hours. | |
| Dimensions | 155x72x20 mm (6.1×2.8×0.8 inch), Weight: 180 g (6 oz) | |
How to use ODROID-GO-ADVANCE
Preparations
Transferring game ROMs with SD Card reader
Transferring game ROMs via Network
You can choose the two ways according to your preferences to transfer game ROMs. If you are not familiar with CLI, follow the SAMBA.
SAMBA
The SAMBA server has installed since the Jan 29, 2020 image by default, so you don't have to any configuration about SAMBA server.
You just need a network device and your HOST-PC.
ssh(scp) on Ubuntu
Play games
| First Generation | Second Generation | Third Generation |
|---|---|---|
 |  |  |
Force Power OFF
If you have any problem with your ODROID-GO-Advance, you will try to switch off.
You can switch off ODROID-GO-Advance by pushing the on/off buttons for about 6 seconds.
Disassembly Guide
Hardware
Block Diagram
Documentations
- ODROID-GO-Advance Schematic :
- ODROID-GO-Advance PCB dimension :
Header(P2) Description
| Pin # | GPIO | Type | Function | Sysfs # |
|---|---|---|---|---|
| 1 | GND | POWER | - | - |
| 2 | GPIO1_C0 | IN/OUT | UART1_RX | #48 |
| 3 | GPIO1_C1 | IN/OUT | UART1_TX | #49 |
| 4 | GPIO1_C2 | IN/OUT | UART1_CTS | #50 |
| 5 | GPIO1_C3 | IN/OUT | UART1_RTS | #51 |
| 6 | 3.0V | POWER | - | - |
| 7 | GPIO0_C2 | IN/OUT | I2C1_SCL | #18 |
| 8 | GPIO0_C3 | IN/OUT | I2C1_SDA | #19 |
| 9 | GPIO1_B2 | IN/OUT | - | #42 |
| 10 | 5.0V | POWER | - | - |
luke.go