ODROID-GO-SUPER
Specifications
Processor | CPU : RockChip RK3326(Quad-Core ARM 64bit Cortex-A35 1.3GHz) GPU : Mali-G31 MP2 |
|
OS | Ubuntu 18.04. 19.10 and 20.04 on Kernel 4.4 Aarch64 Modified EmulationStation front-end with Libretro. GPU accelerated OpenGL-ES on DRM-FB |
|
Memory | 1GB (DDR3L 786Mhz, 32 Bits bus width) | |
Storage | SPI Flash(16Mbytes Boot), Micro SD Card slot(UHS-1 Capable interface) | |
Display | 5inch 854×480 TFT LCD (Wide viewing angle display, MIPI-DSI interface) | |
Audio | Earphone stereo jack, 0.5Watt 8Ω Mono speaker | |
Battery | Li-Polymer 3.7V/4000mAh(76.5×54.5×7.5mm(L*W*T)), Up to 10 hours of continuous game playing time | |
DC Jack | 5V input, USB-C power connector : A USB -C charging cable is included in the package. Maximum drawing current: 1.5Amp | |
External I/O | USB 2.0 Host x 1, 10Pin port(I2C, GPIO, IRQ at 3.3Volt) | |
Input Buttons | F1, F2, F3, F4, F5, F6, A, B, X, Y, Direction Pad, Left Shoulder, Right Shoulder, Left Shoulder2, Right Shoulder2, Analog joystick, Analog joystick2 | |
Wireless | Optional USB WiFi adapter | |
Power consumption | Game emulation: 350 ~ 600mA (depends on backlit brightness and type of game emulations and the wireless usage), Power off mode: <1mA | |
Charging time | 3.4 ~ 4 hours when the device turns off. When you play game, it takes 4.5 ~ 5.5 hours. | |
Dimensions | 204x86x25 mm, Weight: 280 g (10 oz) |
How to use ODROID-GO-SUPER
Battery charging
Preparations
Transferring game ROMs with SD Card reader
Transferring game ROMs via Network
You can choose the two ways according to your preferences to transfer game ROMs. If you are not familiar with CLI, follow the SAMBA.
SAMBA
The SAMBA server has installed since the Jan 29, 2020 image by default, so you don't have to any configuration about SAMBA server.
You just need a network device and your HOST-PC.
ssh(scp) on Ubuntu
Play games
Force Power OFF
If you have any problem with your ODROID-GO-Super, you will try to switch off.
You can switch off ODROID-GO-Super by pushing the on/off buttons for about 6 seconds.
Hardware
Block Diagram
Documentations
Header(P2) Description
Pin # | GPIO | Type | Function | Sysfs # |
---|---|---|---|---|
1 | GND | POWER | - | - |
2 | GPIO3_C1 | IN/OUT | I2S0_8CH_MCLK | #113 |
3 | GPIO3_C2 | IN/OUT | I2S0_8CH_LRCKTX / TDM_FSYNC | #114 |
4 | GPIO3_C3 | IN/OUT | I2S0_8CH_SCLKTX / TDM_SCLk | #115 |
5 | GPIO3_C4 | IN/OUT | I2S0_8CH_SDO0 / TDM_SDO | #116 |
6 | 3.3V | POWER | - | - |
7 | GPIO3_C5 | IN/OUT | I2S0_8CH_SDI0 / TDM_SDI | #117 |
8 | GPIO3_C6 | IN/OUT | - | #118 |
9 | GPIO3_C7 | IN/OUT | - | #119 |
10 | 5.0V | POWER | - | - |