This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
old_product:accessory:picwriting [2016/02/25 09:45]
john1117 [Writing bootloader with MPLAB IPE]
old_product:accessory:picwriting [2017/05/31 11:10]
luke.go ↷ Page moved from old_product:picwriting to old_product:etc:picwriting
Line 1: Line 1:
 ====== Writing bootloader with PICkit 3 ====== ====== Writing bootloader with PICkit 3 ======
-1. MPLAB IDE Download & Install+==== MPLAB IDE Download & Install ====
 [[http://www.microchip.com/mplab/mplab-x-ide]] [[http://www.microchip.com/mplab/mplab-x-ide]]
-Run MPLABX installer+**Run MPLABX installer**
-You can write a firmware using MPLAB IDE or IPE+{{:en:ioboard:mplabxinstaller.png?400|}}
 +**Sellect MPLAB IPE.**
-Run MPLAB IPE+{{:en:ioboard:mplabipeinstall.png?400|}} 
 +**Run MPLAB IPE.** 
 +==== IPE Settings ==== 
 +**Select device and tool.** 
-Select device and tool 
   Family : Advanced 8-bit MCUs (PIC18)   Family : Advanced 8-bit MCUs (PIC18)
   Device : PIC18F45K50   Device : PIC18F45K50
   Tool : PICkit3   Tool : PICkit3
-Connect power to your USB-IOBOARD using microUSB cable+**Connect power to your USB-IOBOARD using microUSB cable.\\ 
 +Then, connect PICkit3.** 
-Then, connect PICkit3.+**Apply && Connect.**
-Apply && Connect+{{:en:ioboard:ipeconnect.png?400|}}
-Bootloader Download+**Bootloader Download.**
-Select the bootloader hex file.+{{ :en:fw.zip}}
-Run Program+**Select the bootloader hex file.**
 +**Run Program.**
  • old_product/accessory/picwriting.txt
  • Last modified: 2017/05/31 18:10
  • by luke.go