old_product:accessory:picwriting [ODROID Wiki]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Writing bootloader with PICkit 3 ======

==== MPLAB IDE Download & Install ====

[[http://www.microchip.com/mplab/mplab-x-ide]]

**Run MPLABX installer**

{{:en:ioboard:mplabxinstaller.png?400|}}

**Sellect MPLAB IPE.**

{{:en:ioboard:mplabipeinstall.png?400|}}

**Run MPLAB IPE.**

{{:en:ioboard:mplabipe.png?400|}}

==== IPE Settings ====

**Select device and tool.**

{{:en:ioboard:ipeconfig.png?400|}}

  Family : Advanced 8-bit MCUs (PIC18)
  Device : PIC18F45K50
  Tool : PICkit3

**Connect power to your USB-IOBOARD using microUSB cable.\\
Then, connect PICkit3.**

{{:en:ioboard:ioboardwithpickit.jpg?400|}}

**Apply && Connect.**

{{:en:ioboard:ipeconnect.png?400|}}

**Bootloader Download.**

{{ :en:fw.zip}}

**Select the bootloader hex file.**

{{:en:ioboard:ipehexfile.png?400|}}

**Run Program.**

{{:en:ioboard:ipeprogram.png?400|}}