old_product:accessory:picwriting

This is an old revision of the document!


Writing bootloader with PICkit 3

1. MPLAB IDE Download & Install

http://www.microchip.com/mplab/mplab-x-ide

Run MPLABX installer

You can write a firmware using MPLAB IDE or IPE

Run MPLAB IPE

Select device and tool

Family : Advanced 8-bit MCUs (PIC18)
Device : PIC18F45K50
Tool : PICkit3

Connect power to your USB-IOBOARD using microUSB cable

Then, connect PICkit3.

Apply && Connect

Bootloader Download

Select the bootloader hex file.

Run Program

  • old_product/accessory/picwriting.1456362923.txt.gz
  • Last modified: 2016/02/25 09:45
  • by john1117