Differences

This shows you the differences between two versions of the page.

--- old_product:accessory:picwriting [2016/02/25 09:48]
john1117
+++ old_product:accessory:picwriting [2017/05/31 18:10] (current)
luke.go ↷ Page moved from old_product:etc:picwriting to old_product:accessory:picwriting
@@ Line 1: / Line 1: @@
 ====== Writing bootloader with PICkit 3 ======
-. MPLAB IDE Download & Install
+==== MPLAB IDE Download & Install ====
 [[http://www.microchip.com/mplab/mplab-x-ide]]
-Run MPLABX installer
+**Run MPLABX installer**
-{{:en:ioboard:mplabxinstaller.png?200|}}
-Sellect
-{{:en:ioboard:mplabipeinstall.png?200|}}
-Run MPLAB IPE
+{{:en:ioboard:mplabxinstaller.png?400|}}
-{{:en:ioboard:mplabipe.png?200|}}
-. Settings
+**Sellect MPLAB IPE.**
+{{:en:ioboard:mplabipeinstall.png?400|}}
+**Run MPLAB IPE.**
+{{:en:ioboard:mplabipe.png?400|}}
+==== IPE Settings ====
+**Select device and tool.**
+{{:en:ioboard:ipeconfig.png?400|}}
-Select device and tool
   Family : Advanced 8-bit MCUs (PIC18)
   Device : PIC18F45K50
   Tool : PICkit3
-Connect power to your USB-IOBOARD using microUSB cable
+**Connect power to your USB-IOBOARD using microUSB cable.\\
+Then, connect PICkit3.**
+{{:en:ioboard:ioboardwithpickit.jpg?400|}}
-Then, connect PICkit3.
+**Apply && Connect.**
-Apply && Connect
+{{:en:ioboard:ipeconnect.png?400|}}
-Bootloader Download
+**Bootloader Download.**
-Select the bootloader hex file.
+{{ :en:fw.zip}}
-Run Program
+**Select the bootloader hex file.**
+{{:en:ioboard:ipehexfile.png?400|}}
+**Run Program.**
+{{:en:ioboard:ipeprogram.png?400|}}